Black white and red

Good morning Bloggers, well I have been up most of the night the wind has been howling all night, hence why I am up at such and early hour.

here is today's card.

This is a 6x6" card, I matted it with some more white card, I cut out four Spellbinder flourish trims in black, I then cut our four corners from Spellbinders Gold Corner sets one in red, and the centre of a Marianne design doily centre's in red twice. I cut a piece of black card to measure 2 and half inches and a piece of white just slightly smaller, I lay the four trims around the sides then put in the square layered on top of each other, put the corners on then the centre, hope you like today's card.
I have entered this card into the following challenges.
Lexi's Creations Black and white and one other colour No 36
ABC Challenge N for not just one No 151

Stately Circles

Hi Todays Card

I folded a A4 card in half from top to bottom to make this card, I cut a peice of Lilac pearl card and cut it half " smaller than the card, I then cut another piece of white card and cut it half " smaller again, I embossed the white card layer with the Spellbinder Awesome blooms embossing folder & layered them up, I took a piece of Lilac ribbon and wrapped it around the two layers before I stuck them to the card. I then cut three of the second largest of the spellbinder statley circles out of Lilac centura pearl card, I cut the center piece out with with the Lilac pearl card and the smaaler one with white card, and stamped the greeting and heat embossed it with black glitter embossing powder., I layered the circles and slider and glued then to the card, I cut two of the spellbinders Fantastic Flourish corners and cut them down to fit what I needed. and that was all I done with todays card.
hope you are all well and see you again soon.

True Blue

Good Morning Bloggers, I hope the weather were you are is not like it is here, it is pouring down with rain.
Today's card is for the Allsorts true blue challenge No1
also ABC N for not just one No 51 

Card measures 6x6" I matted it with silver mirror card then some pale blue backing paper that I had in my stash, I cut a ribbon strip with centura pearl card then some more backing paper from my stash, I cut out a tattered lace square with pearl blue card,then backed it with some of the pale blue backing paper and some trellis card from my craft studio, I cut a stately circle out with mirror card and stamped the sentiment on with card and cut it out with a circle die, got a piece of blue ribbon folded it and put a button on with a gem to hide the holes, some flowers from wild orchid craft the border is from tattered lace which I cut with the same card as the square.
thank you for stopping by.

 

Tressle card

good morning all when you read this I will be away and as I said I have scheduled this post

 

this is a rather simple card, the frame and tressle is from my craft studio, which I stuck together lay a satin ribbon around I layered the label die which i will tell you which one i used on my return, stamped it with the sentiment put a bow and some flowers on that i made from the waste.

hope you like my card and sorry this is short and sweet but i am running as per usual xxxx

 

morning all just two quick cards for this weekend as i am going away so don't really have time to tell you what I have used, so will post them and then when i come back i will update them I have scheduled Fridays and Saturdays.

 

just a quick note I pricked all the way around a white Matt then matted with pink embossed another white Matt, cut two circles out the embossed mat then lay the cutout in the centre, cut a glittered swirl and assembled as shown, will let you know the dies i used on my return.

 

BRACKET BORDER

Good Morning Bloggers, hope you are all well today? sorry for lack of post yesterday just had sooooo much to do as we are hosting an AGM this weekend for the Overseas Buffaloes, not enough hours in the day to get everything done.

Card measurements 6x6" I started card with white card stock and cut it to make a 6x6" card.

I had some white embossed card which I used as background.

I cut the bracket die from spellbinders in this lovely lilac Centura Pearl

I cut the square with Tattered lace 3in 1 die with lilac mirror card along with the greeting, assembled it as shown and put some Organza ribbon down the side and made a bow to add on, I then stuck the lilac ribbon slider on to finish the card off.

hope you like today's card and it makes up for lack of post yesterday .

Christine xxxx

Best Wishes

Good morning bloggers, I hope you all had a great holiday weekend.
Today's card.

Card measures 6x6" first I took some lovely shimmery Gray colour card that I bought from my local shop called Papercuts - a slice of imagination Ltd  they also have a website,
I matted it with the same colour and pin pricked it all around which gives a lovely effect,I matted it again with some Turquoise card then some turquoise and Gray spotted background paper on top, I cut out three tags with spellbinders tags which I am not sure of the name, and cut out three Turquoise centre and stamped them with the greeting, I lay some ribbon down the side and made a bow I cut out a swirl which I bought from Dies to die for
and I also made the flower which I bought from wild orchid crafts 
I hope you like today's card, thank you for stopping by

  

Pink Wrap

Good morning crafter's and happy bank holiday to you all,
Today's card is a simple one.

 

card measure's 6x6" as it is my favourite size, I matted it with deep pink card stock, then cut a white mat as well slightly smaller and with a Spellbinders border die I lay it down across the white mat and cut out 7 rows to give the back ground effect, I then took the Tattered lace (with love) oval die  and cut this out in a lovely pink mirror card, then halved it, I cut a tag from framed tags one, and stamped the greeting on, I arranged the two halved of the oval against the edge of the card back to back and ties with a pink satin ribbon put the brad through the whole thing and put the tag on as shown above.

thank you for stopping by and see you again tomorrow.

pink Silhouette

Good morning all.
Today's card is for the Fab and funky Lots of Pink and Die cutting diva's anything goes Challenges.

Card measures 6x6" base card is white, I embossed the crafters companion Core'dinations pink background card with crafters companion Embossalicious lattice embossing folder and then mounted it on the card I put some Cosmic shimmer pearl dots dusky pink in the cross overs,I cut a pink Silhouette with a die from Marrianne dies, I also cut a Tattered lace 3 in 1 circle die, and punch the border with a Martha Stewart border punch, layered it all up as shown above, i hope you like today's card, see you all tomorrow.

best mates

Good morning crafter, I hope you all have a great Holiday weekend.
A simple card today.

Card measures 6x6" base card is white and I mattered and layered it with Navy then pale blue card, I then printed out the topper from Crafters Companion Frou Frou Digkit Elegance CD rom, (but you need the Serif craft artist 2 to be able to use it). I then cut the frame from the tattered lace rectangle die, put some navy ribbon on and made a bow, and put a sparkly ribbon slider on to hide the knot. hope you like this card as much as i do. ta ta for now.
thank you for stopping by.
Challenge's entered ABC Challenge make it sparkle
Forever Friends  monthly May

Birthday Wishes

Good Morning bloggers, 
Today's card.

 

card measures 6x6", I cut two red rectangles and one white which measured 4x 5 and half " I cut all four spellbinders classic borders, and layered them on top of each other as shown in diagram above, I cut two red squares with the smallest 3 of spellbinders Adorning squares, and I backed one with white card, I cut one white square with the two smallest dies, I cut a white tag from spellbinders framed tags one, the two corners are the waste from the Tattered lace Victorian rectangle, which I think is a crime to throw away as they make lovely Corners, I layered them all up as shown above, and in the corner pieces and the centre of the square on the front I put a dot of Cosmic Shimmer White Pearl Pearlescent PVA

to finish it off, I hope you like today's card. 

thank you for stopping by.

 

Pink Birthday

Good morning Bloggers hope you are all bright and breezy today.

 Today's card is a Birthday card I have made to enter into the Creative Inspirations Challenge which is Birthday's as they are 5 years old how good they have been doing over the years. Also entering this into Lexi's Creations which is also Birthday

Card is 6x6" square, I matted it with some pink Centura Pearl card from Crafters companion, and embossed it with a Cuttlebug embossing folder dots, I then embossed some white card with 3D M-Bossabilities Delightful Daisies, I then cut a piece of the Centura Pearl card to measure 3" square and cut the smallest 3 dies from Spellbinders Adorning Squares, also cut the same in white, I layered the the two larger squares on the card, glued the 3 die cuts to the top white card flat, then raised the outer piece of pink on 3D foam, I set the white small Square's on a twisted angle, I put a piece of pink centura Pearl on the bottom which was also embossed with the dots, before I wrapped some pink organza ribbon around, I cut out a tag with Spellbinders framed tags one, stamped the sentiment on and slid it on the ribbon, then stuck it down, I made a bow to put on the side with the same ribbon, I found a ribbon slidder that I put in the centre of the bow.

I hope you like today's card and thank you for stopping by.

  

Wed 1st May

Good morning bloggers, hope you are all feeling good today.
Today's card

I started with a 8x8" card, I matted with white card Stamped the sentiment on the bottom, then embossed it with Awesome blooms M-Bossabilities embossing folder, I cut 7 layers of purple card with the edge die from spellbinders Classic Bracket border die set, I then cut another 7 with the some die but with white sparkly paper I bought a couple of years ago, I made a Purple bow with a brad, and layered all the borders on top of each other the way I wanted them on the card, and cut out the centre with spellbinders labels 6, I then cut two smaller ones with the same die out the bit that came out the centre, I lay the layers on the card,   and put the smaller ones in the centre piece, added the bow and brad and all done.